U-Boot 1.0.0 (Nov 25 2005 - 22:51:36) U-Boot code: 03F00000 -> 03F6A61C BSS: -> 03FA3048 DRAM Configuration: Bank #0: 00100000 63 MB Flash: 0 kB NAND:Probing at 0x9c000000 Flash chip found: Manufacturer ID: 0xEC, Chip ID: 0x76 (Samsung K9F1208 64Mb) 1 flash chips found. Total nand_chip size: 64 MB Get Environment from NAND offset 0x70000 ... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SD found : SD Frequency is 12MHz (with MBR) UPDATE ... BOOT UPDATE ---------------------------- reading gp2xboot.img ** Unable to read "gp2xboot.img" from mmc 0:1 ** 1 : g_filesize 0 gp2xboot.img not found KERNEL UPDATE ---------------------------- reading gp2xkernel.img ** Unable to read "gp2xkernel.img" from mmc 0:1 ** 2 : g_filesize 0 gp2xkernel.img not found FILE UPDATE ---------------------------- reading gp2xfile.img READ START 25165824 Why block_cnt == 0?? Why block_cnt == 0?? 25165824 bytes read 3 : g_filesize 1800000 gp2xfile.img Update 25165824 0x1804000 NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00007208, 12042240 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x000098b0, 17104896 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x0000ca15, 23412736 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00001a15, 1048576 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x0000229e, 2162688 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00002b62, 3325952 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00002707, 2752512 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00003116, 4063232 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00006754, 10649600 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00002c38, 3424256 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00003b05, 5357568 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x0000a7da, 19070976 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00001a96, 1114112 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... nand_write_page: Failed write, page 0x00007ddc, 13582336 bytes written: ERROR NAND write: device 0 offset 0x240000, size 0x1804000 ... 25182208 bytes written: OK ### main_loop: bootcmd="nand read 0x1000000 0x80000 0x180000; bootm" Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x80000, size 0x180000 ... 1572864 bytes read: OK ## Booting image at 01000000 ... Image Name: MMSP2 Linux Kernel Created: 2005-11-28 4:23:05 UTC Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 836766 Bytes = 817.2 kB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... Linux version 2.4.25 (root@localhost.localdomain) (gcc version 2.95.3 20010315 (release)) #2401 2005. 11. 28. (¿ù) 13:22:54 KST CPU: Arm920Tid(wb) revision 0 Machine: MagicEye-MDK Warning: bad configuration page, trying to continue MP2520F FCLK: 199065600 Hz, M = 0x49 P = 1 S = 0 MP2520F UCLK: 95846400 Hz, M = 0x60 P = 0 S = 2 MP2520F ACLK: 147456000 Hz, M = 0x98 P = 0 S = 2 MP2520F PCLK: 49766400 Hz On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock3 rw Console: colour dummy device 80x30 Calibrating delay loop... 99.32 BogoMIPS Memory: 32MB = 32MB total Memory: 30208KB available (1088K code, 751K data, 280K init) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) CPU: Testing write buffer: pass POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) I2C: MMSP2 algorithm module loaded. <6>I2C: Adding MMSP2-I2C-Adapter. I2C: Successfully added bus ttyS0 at MMIO 0xc0001200 (irq = 48) is a MMSP2 ttyS1 at MMIO 0xc0001220 (irq = 52) is a MMSP2 ttyS2 at MMIO 0xc0001240 (irq = 56) is a MMSP2 IRQ_DISP Number = 0 Console: switching to colour frame buffer device 40x30 MMSP2 mmsp2_RGB0 framebuffer driver start MMSP2 mmsp2_RGB1 framebuffer driver start pty: 256 Unix98 ptys configured MMSP2 DualCPU Interface Driver MMSP2 Video Post Processor Driver register device MMSP2 GPIO KEY OK MMSP2 battery check Driver MMSP2 Real Time Clock driver loop: loaded (max 8 devices) ac97_codec: AC97 Audio codec, id: WML18 (Wolfson WM9711/9712) mp2520f.c: Using NAND S/W ECC NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Creating 5 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00000000-0x00080000 : "Bootloader" 0x00080000-0x000a0000 : "Param" 0x000a0000-0x001a0000 : "Kernel" 0x001a0000-0x019a0000 : "Filesystem" 0x019a0000-0x04000000 : "Extend" usb.c: registered new driver hub Linux video capture interface: v1.00 MMC/SD Slot initialized NetWinder Floating Point Emulator V0.97 (double precision) FAT: bogus logical sector size 65535 FAT: bogus logical sector size 65535 MMC/SD Card Detected Partition check: mmcsda: p1 Register SD: 982MB Inode #27 was a directory with children - removing those too... VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing init memory: 280K INIT: version 2.84 booting Started device management daemon v1.3.25 for /dev Mount proc and devpts filesystem Expand RAM file system image INIT: Entering runlevel: 3 Last login: Thu Jan 1 00:00:11 on ttyS0 -t and -C not supported MSDOS FS: IO charset utf8 rm: cannot remove `/mnt/sd/gp2xboot.img': No such file or directory rm: cannot remove `/mnt/sd/gp2xkernel.img': No such file or directory MSDOS FS: IO charset utf8 SDL_SYS_JoystickInit MMC/SD card ejected MMC/SD Card Detected mmcsd/disc0/disc: p1 Register SD: 241MB MSDOS FS: IO charset utf8